DIY Bike Wheels Welded With Rebar

Alida

[Liebregts] is working on a trike style, and necessary a pair of wheels to go up front. Common bicycle wheels wouldn’t do, as they’re not built to operate with a one-sided support. They also wanted to be ready to mount disc brakes. Hence, they established about developing a established of customized wheels to do the occupation.

The construct started with a frequent established of 20″ bike wheel rims with all the spokes taken out. A ring of steel rebar welded on the interior perimeter gave the rims additional strength. A set of hubs and axles had been then fabbed up with a welder and lathe, with provisions for bolting on disc brake components. Lengths of rebar were then welded in as non-adjustable spokes. Up coming, it was time for a coat of paint. At last [Liebregts] mounted the tires and brakes, and referred to as the work performed.

Naturally, it is attainable to get wheels precisely for trike builds. However, [Liebregts] discovered it difficult to uncover precisely what they required, especially the place the disc brake choice was involved. The ideal option was a customized build.  The ensuing wheels are clearly a lot heavier than common bike wheels, but they’re also probable a truthful little bit stronger, much too. If you want to weigh down a tarpaulin, for instance, these wheels may well just do the trick.

We’ve viewed some other ridiculous wheels on trikes right before, too! Oh, and who suggests wheels require to be a comprehensive circle, in any case? Creative imagination will never cease to amaze!

Leave a Reply

Next Post

What Is about:blank, and How Do You Remove It?

About:blank is an vacant page developed into internet browsers. It is shown when a browser has very little to display you. To eliminate about:blank when you begin your browser, go to your browser’s configurations, and adjust the residence page from about: blank to a distinct tackle, or the new tab […]